Built for ISO 6431 Dimensional Compliance and Reliability
ISO cylinders give you the freedom to use internationally compatible mountings and accessories. We updated our FAQ2R Series ISO 6431 air cylinder with a new extruded body to better house flush-mounted sensors while also giving it a clean shape. The single- and double-rod units are built tough with a hard-anodized aluminum cylinder inner and outer diameter plus painted end caps. Each unit comes with an aluminum alloy magnetic piston, adjustable air cushions at both ends and a machined male rod thread with jam nut. Optional Reed and electronic sensors mount securely to an extrusion slot anywhere along the length of the cylinder. The cylinders come in bore diameters from 32 to 125 millimeters, and standard strokes range from 25 to 1,000 millimeters for all bore sizes.
Key Specifications
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- Magnetic piston standard in all sizes
- Single and double-rod versions
- ISO 6431 dimensional interchange
- VDMA24562 compliance
- Adjustable air cushions at both ends
- Machined male rod thread with jam nut standard
- Hard anodized aluminum cylinder tube ID and OD with painted end caps
- Operating pressure: 1 MPa, 150 psi
- Operate with or without additional lubrication
- An aluminum alloy magnetic piston and machined male rod thread with jam nut are standard features.
- The standard annular piston magnet is permanently bonded into the grooved piston for reliability. The polarized permanent magnet, made of rubber bonded barium ferrite, is very stable and unaffected by shock. Under normal use it will remain magnetized indefinitely.
- The FAQ2R Series has a new extruded body, made of hard-anodized aluminum alloy, designed for flush mounted sensors. The sensors, when combined with an adapter, clamp rigidly to an extruded mounting slot and can clamp anywhere along the length of the cylinder, ensuring precise position sensing.
Applications
Conveyor belts
Looking for a custom solution? Get a quote or view our other options.
Similar products in Actuators
View All Actuators
FAQ2R FAE
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- FAQ2R Series: ISO 6431/VDMA24562
- FAE Series: ISO 6432/CETOP RP52P
- Magnetic piston standard in all sizes
- Single- and double-rod versions
- Machined male rod thread with jam nut standard
LONGSTROKE Series
Tie Rod Cylinders- Bore sizes: 2, 2 ½, 3 and 4 inches
- Strokes: up to 12 inches
- Round and square heads available
- Clear anodized aluminum cylinder outer diameter and hard anodized bore inner diameter
- Composite rod bearing for longer life
- Chrome-plated stainless steel piston rods
SC, FML and FHL Series
Swing Clamp Cylinders- Bore sizes: 25, 32, 40, 53, 63 millimeters (12, 16, 20 millimeters also available for SC Series)
- Hard anodized aluminum alloy housing
- Hard chrome-plated carbon steel piston rod
- Buna-N piston seal
- Magnetic piston for position sensing (SC Series)
FDF and FDXS Series
Twin-Rod Cylinder- Bore sizes: 10, 16, 20, 25 millimeters (32 millimeters also available for FDXS Series)
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Compact design
- Twin bores provide double the thrust
- Non-rotating design for precision positioning
- Anodized aluminum alloy
FGYB and FGYR Series
Magnetically Coupled Rodless Actuators- Bore sizes: 10, 15, 20, 25, 32, 40 millimeters
- Strokes: up to 1,500 millimeters
- Tapped hole pattern on two adjacent sides of the slider
- Mounting: Nose type (FGYB Series) and block type (FGYR Series)
- Magnetic piston standard (FGYR Series)
FGM and FGML Series
Guided Motion Actuators- Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63 millimeters
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Non-rotating design for precision positioning
- Compact design
- Extended power range
- Good load carrying capacity