Exceptional Power and Load Capabilities in a Compact Design
FGM Series guided motion cylinders offer an extended power range and effective load carrying capability. These compact units feature a twin guide shaft design to ensure precise, non-rotating positioning. Customers can choose between the FGMM for ball bearings, and the FGML sintered bronze sleeve bearing. Both cylinders come in a variety of bore sizes, and the FGMM model offers two additional bore diameters to suit smaller-scale applications. Adjustable extended stroke versions are also available.
Key Specifications
- Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63 mm
- Strokes from 10 to 100 mm
- Magnetic piston standard in all sizes
- Non-rotating design for precision positioning
- Compact design
- Operating pressure: 150 psi max.
- Extended power range
- Good load carrying capacity
- Dowel pin holes on each mounting surface.
- Easily adjustable sensors mountable in linear slots in the housing
- Magnetic pistons are standard on all actuators.
- The twin guide shaft design provides extended power and load carrying capabilities.
- Dowel pin holes on each mounting surface provide a choice of four mounting positions.
- The non-rotating design ensures precision positioning.
- FGMM and FGML guided thrusters are interchangeable with models from other vendors.
Applications
- Packaging machinery
- Bending equipment
- Label tamping
- Weld fixturing
Looking for a custom solution? Get a quote or view our other options.
Similar products in Actuators
View All Actuators
FAQ2R FAE
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- FAQ2R Series: ISO 6431/VDMA24562
- FAE Series: ISO 6432/CETOP RP52P
- Magnetic piston standard in all sizes
- Single- and double-rod versions
- Machined male rod thread with jam nut standard
LONGSTROKE Series
Tie Rod Cylinders- Bore sizes: 2, 2 ½, 3 and 4 inches
- Strokes: up to 12 inches
- Round and square heads available
- Clear anodized aluminum cylinder outer diameter and hard anodized bore inner diameter
- Composite rod bearing for longer life
- Chrome-plated stainless steel piston rods
SC, FML and FHL Series
Swing Clamp Cylinders- Bore sizes: 25, 32, 40, 53, 63 millimeters (12, 16, 20 millimeters also available for SC Series)
- Hard anodized aluminum alloy housing
- Hard chrome-plated carbon steel piston rod
- Buna-N piston seal
- Magnetic piston for position sensing (SC Series)
FDF and FDXS Series
Twin-Rod Cylinder- Bore sizes: 10, 16, 20, 25 millimeters (32 millimeters also available for FDXS Series)
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Compact design
- Twin bores provide double the thrust
- Non-rotating design for precision positioning
- Anodized aluminum alloy
FGYB and FGYR Series
Magnetically Coupled Rodless Actuators- Bore sizes: 10, 15, 20, 25, 32, 40 millimeters
- Strokes: up to 1,500 millimeters
- Tapped hole pattern on two adjacent sides of the slider
- Mounting: Nose type (FGYB Series) and block type (FGYR Series)
- Magnetic piston standard (FGYR Series)
FJU and FJUK Series
Multi-mount Air Cylinders- Bore sizes: 6, 10, 16, 20, 25, 32 millimeters
- Strokes: up to 50 millimeters
- Lightweight, compact body
- Four extruded slots for mounting sensor
- Hard anodized aluminum for corrosion resistance
- Hard chrome-plated steel piston rod