Rugged Slides Designed for Pick and Place Machines’ Demanding Accuracy and Reliability Requirements
The EZP Series of pick and place pneumatic linear slides are built tough to keep your pick and place equipment running reliably without sacrificing accuracy. Delivering combined horizontal and vertical motion, the EZP Series’ integrated and sealed linear ball bearings provide near play-free operation to ensure good precision. The pairs of bearings are housed in the high-strength aluminum end caps, and the space between them increases with the stroke lengths to provide them higher load capacities. The slides’ rugged design includes a hard-coated aluminum cylinder tube, hard chrome-plated 303 stainless steel piston rod and a choice of case hardened and ground or stainless steel guide shaft. Some models also offer three positions on one or both of the slides.
Key Specifications
- Bore sizes: 1.125 or 2 inches horizontal and 1.125 inches vertical
- Stroke: up to 10 inches by 1-inch increments and 8 to 18 inches (horizontal) by 2-inch increments
- Combines horizontal and vertical motion
- Hard-coated aluminum cylinder tube
- Hard chrome-plated 303 stainless steel piston rod
- Buna-N U-Cup rod and piston seals (Viton available)
- High-strength aluminum end caps
- Case hardened and ground guide shafts (stainless steel available)
- High-performance sealed linear ball bearings (composite bearings available)
- Options and accessories include reed switches, Hall effect sensors, proximity switches, snap action SPDT electrical switches and air pilot switches
- Rugged, aluminum cylinders and sealed linear ball bearings provide near play-free operation.
- Bearings in the EZP pick and place units are housed in the cylinder end caps. As the stroke increases, the pairs of bearings become spaced further apart, increasing bearing load capacity.
- Certain models offer an option of three positions on one or both of the slides.
- EZP slides are available with a transition plate or toolbar that will mount directly to SPG Series parallel grippers.
Applications
- Pick & place machinery
Looking for a custom solution? Get a quote or view our other options.
Similar products in Linear Slides
View All Linear Slides
Single and Double Block-style Linear Slides
Robust Ball Bearing Slides- Standard bore sizes from 3⁄4 to 3.25 inches (6 total)
- Standard strokes up to 30 inches
- Robust design includes four pre-loaded, sealed linear ball bearings and is powered by a tie-rod style actuator
- Many standard options and flexibility for specials
- Available in single or dual bearing block configurations
- Single bearing block SE Series for applications with moderate slide loads and minimal footprint
- Dual bearing block EZ Series for high precision, high load carrying applications
TS Series
Twin Shaft Linear Slide- Standard bore sizes from 1 ⅛ to 4 inches (6 total)
- Standard strokes up to 20 inches
- Unique, leverages a standard cylinder body as the slide carriage and features twin guide shafts supported by four precision linear ball bearings
FGYSR Series
Rodless Slides- Standard bore sizes from 10 to 40 millimeters (6 total)
- Standard strokes up to 1,500 millimeters
- Magnetically coupled carriage for applications with limited space
- Interchangeable design
L and S Series Linear Slides
Basic Linear Slides- Standard bore sizes from 9⁄16 to 3 inches (6 total)
- Cost optimized design includes composite sleeve bearings and replaceable roundbody cylinder
- Available in single or dual bearing block configurations
- S Series single bearing block for minimum installation footprint
- L Series dual bearing block for greater stability, increased load capacity, and longer strokes
FDH Series
Precision Finger Slides- Standard bore sizes 10, 20 and 30 millimeters
- Standard strokes up to 60 millimeters
- Compact design with miniature linear guide driven by built-in, repairable air cylinder for smooth motion
- Rubber bumpers and magnet standard
- Assortment of mounting holes on cylinder body and tool-plate for variety of mounting configurations and load attachments
FGXS Series Air Slides Tables
Precision Slide Tables- Standard bore sizes from 6 to 25 millimeters (6 total)
- Standard strokes up to 150 millimeters
- Dual piston design delivers twice the thrust in a small footprint
- Assortment of mounting configurations and options including adjustable stroke and shock absorbers