High Load Capacity in a Space-Saving Design
The TS Series Pneumatic Linear Slide features a twin-shaft, air or hydraulic powered integral slide system with maximum operating pressure of 150 psi (air or oil-based hydraulics). Because the slide is built into the cylinder, the TS Series is well suited for space-constrained applications. Featuring a high load capacity, the TS Series is designed with two linear ball bearings at each end of the cylinder to provide no-play precision motion. The cylinder tube, end caps and piston are built from aluminum alloy materials, and the linear ball bearings are full steel.
Built-in reliability features include o-rings to provide a positive tool seal and precise mechanical joint, and guided piston shafts eliminate piston-to-cylinder contact that could otherwise cause scuffing. TS Series Pneumatic Linear Slides come in six bore sizes from 1-¼ to 4 inches, guide shaft diameters from ¼ to 1 inch and standard strokes up to 20 inches in 1-inch increments. Customers can also choose from a variety of accessories and tooling options.
Key Specifications
- Hard-coated aluminum cylinder tube.
- Case-hardened and ground guide shafts (stainless steel available).
- High-performance sealed linear ball bearings (composite bearings available).
- High-strength precision machined aluminum end cap.
- Buna-N U-Cup rod and piston seals (Viton available).
- Reed switches, Hall effect sensors and proximity switches available.
- Air cushions available on 2-inch bore and larger models.
- Many options and accessories available.
- This linear ball bearing slide is built into the air cylinder.
- Well-suited for space-constrained applications.
- High load capacity.
- No-play precision motion.
- Many tooling options available.
Applications
- Industrial automation, assembly and packaging
- Robotics
- Pick & place machinery
- Thin parts placers
- Pallet lift stations
- Automotive
- Medical imaging
Looking for a custom solution? Get a quote or view our other options.
Similar products in Linear Slides
View All Linear Slides
Single and Double Block-style Linear Slides
Robust Ball Bearing Slides- Standard bore sizes from 3⁄4 to 3.25 inches (6 total)
- Standard strokes up to 30 inches
- Robust design includes four pre-loaded, sealed linear ball bearings and is powered by a tie-rod style actuator
- Many standard options and flexibility for specials
- Available in single or dual bearing block configurations
- Single bearing block SE Series for applications with moderate slide loads and minimal footprint
- Dual bearing block EZ Series for high precision, high load carrying applications
EZP Series
Pick and Place Ball Slides- Bore sizes: 1.125 or 2 inches horizontal; 1.125 inches vertical
- Stroke: up to 18 inches
- Combined horizontal and vertical motion
- Hard-coated aluminum cylinder tube
- Hard chrome-plated 303 stainless steel piston rod
- Buna-N U-Cup rod and piston seals. (Viton Available)
- High-strength aluminum end caps
FGYSR Series
Rodless Slides- Standard bore sizes from 10 to 40 millimeters (6 total)
- Standard strokes up to 1,500 millimeters
- Magnetically coupled carriage for applications with limited space
- Interchangeable design
L and S Series Linear Slides
Basic Linear Slides- Standard bore sizes from 9⁄16 to 3 inches (6 total)
- Cost optimized design includes composite sleeve bearings and replaceable roundbody cylinder
- Available in single or dual bearing block configurations
- S Series single bearing block for minimum installation footprint
- L Series dual bearing block for greater stability, increased load capacity, and longer strokes
FDH Series
Precision Finger Slides- Standard bore sizes 10, 20 and 30 millimeters
- Standard strokes up to 60 millimeters
- Compact design with miniature linear guide driven by built-in, repairable air cylinder for smooth motion
- Rubber bumpers and magnet standard
- Assortment of mounting holes on cylinder body and tool-plate for variety of mounting configurations and load attachments
FGXS Series Air Slides Tables
Precision Slide Tables- Standard bore sizes from 6 to 25 millimeters (6 total)
- Standard strokes up to 150 millimeters
- Dual piston design delivers twice the thrust in a small footprint
- Assortment of mounting configurations and options including adjustable stroke and shock absorbers