Twice the Thrust and Precise Positioning in a Space-Saving Footprint.
When your application demands high force output in a low-profile unit, the FDF and FDXS Series double-acting cylinders are an excellent choice. The cylinders’ twin rods deliver two times the thrust while the non-rotating design and standard magnetic piston ensure precise positioning. The cylinder features a tough, anodized aluminum housing and stainless piston rod. Additional features include rubber bumper cushions and nitrile Buna-N piston rod and piston seal.
The FDF Series comes with a sleeve bearing and is available in bore diameters from 10 to 25 millimeters, and the FDXS Series offers a precision recirculating ball bearing or sleeve bearing and diameters from 10 to 32 millimeters. Strokes range from 10 to 100 millimeters, and both series are interchangeable with other popular cylinders.
Key Specifications
- Bearing:
- FDF Series: Sleeve bearing
- FDXS Series: Recirculating ball or sleeve
- Bore diameters:
- FDF Series: 10, 16, 20, 25 mm
- FDXS Series: 10, 16, 20, 25, 32 mm
- Strokes from 10 to 100 mm
- Magnetic piston standard in all sizes
- Compact design
- Twin bores provide double the thrust
- Non-rotating design for precision positioning
- Anodized aluminum alloy housing
- Stainless steel piston rod
- Nitrile Buna-N piston rod seal and piston seal
- Operating pressure: 100 psi
- Optional, easily adjustable sensors
- Rubber bumpers on each end
- The twin bore, non-rotating design provides double the thrust forces with precision positioning.
- The cylinders are built for durability with an anodized aluminum housing and end covers. The piston rod is made of stainless steel.
- The cylinders interchange easily with some competitive models.
Applications
- Multi-axis assemblies
- Robotic arm designs
- Cosmetic filling machines
- Beverage dispensing equipment
- Label tamping
- Secondary tamping
Looking for a custom solution? Get a quote or view our other options.
Similar products in Actuators
View All Actuators
FAQ2R FAE
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- FAQ2R Series: ISO 6431/VDMA24562
- FAE Series: ISO 6432/CETOP RP52P
- Magnetic piston standard in all sizes
- Single- and double-rod versions
- Machined male rod thread with jam nut standard
Stopper Cylinders, ST Series and Global Stopper Cylinder
Stopper Cylinders- ST Series: 32, 40 and 50 millimeter bores and operation at 145 psi
- ST Series: Piston speed: 50 to 100 mm/second
- ST Series: Buna-N bumpers at both ends
LONGSTROKE Series
Tie Rod Cylinders- Bore sizes: 2, 2 ½, 3 and 4 inches
- Strokes: up to 12 inches
- Round and square heads available
- Clear anodized aluminum cylinder outer diameter and hard anodized bore inner diameter
- Composite rod bearing for longer life
- Chrome-plated stainless steel piston rods
SC, FML and FHL Series
Swing Clamp Cylinders- Bore sizes: 25, 32, 40, 53, 63 millimeters (12, 16, 20 millimeters also available for SC Series)
- Hard anodized aluminum alloy housing
- Hard chrome-plated carbon steel piston rod
- Buna-N piston seal
- Magnetic piston for position sensing (SC Series)
FGYB and FGYR Series
Magnetically Coupled Rodless Actuators- Bore sizes: 10, 15, 20, 25, 32, 40 millimeters
- Strokes: up to 1,500 millimeters
- Tapped hole pattern on two adjacent sides of the slider
- Mounting: Nose type (FGYB Series) and block type (FGYR Series)
- Magnetic piston standard (FGYR Series)
FGM and FGML Series
Guided Motion Actuators- Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63 millimeters
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Non-rotating design for precision positioning
- Compact design
- Extended power range
- Good load carrying capacity