Reliable Actuators Designed for ISO 6432 Dimensional Compliance
FAE Series single and double rod cylinders are built to ISO 6432 dimensions. The family is available with bore diameters of 12 to 40 millimeters, and maximum strokes are as high as 1,000 millimeters for single rod and 500 millimeters for double rod units. Designed for long life, cylinders with bore diameters up to 25 millimeters are made from corrosion-resistant stainless steel, and larger-bore units offer anodized aluminum construction. Each cylinder comes standard with an aluminum alloy magnetic piston, mounting nut and machined male rod thread with jam nut.
Key Specifications
- Bore sizes: 12 to 25 millimeters (stainless steel barrel) and 32 to 40 millimeters (anodized aluminum barrel)
- Strokes: up to 1,000 millimeters (single rod) and 500 millimeters (double rod)
- Operating pressure: 1 MPa, 150 psi
- Magnetic piston standard in all sizes
- Single and double-rod versions
- ISO 6432 dimensional interchange
- CETOP RP52P compliance
- Machined male rod thread with jam nut standard on all sizes
- Anodized aluminum end covers
- Wide range of models for many applications
- Mounting nut on all sizes
- ø32 and ø40 bores: offered as extended sizes with similar features
- An aluminum alloy magnetic piston and machined male rod thread with jam nut are standard features.
- The standard annular piston magnet is permanently bonded into the grooved piston for reliability. The polarized permanent magnet, made of rubber bonded barium ferrite, is very stable and unaffected by shock. Under normal use it will remain magnetized indefinitely.
- Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the FAE Series cylinder.
Applications
Conveyor belts
Looking for a custom solution? Get a quote or view our other options.
Similar products in Actuators
View All Actuators
FAQ2R FAE
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- FAQ2R Series: ISO 6431/VDMA24562
- FAE Series: ISO 6432/CETOP RP52P
- Magnetic piston standard in all sizes
- Single- and double-rod versions
- Machined male rod thread with jam nut standard
LONGSTROKE Series
Tie Rod Cylinders- Bore sizes: 2, 2 ½, 3 and 4 inches
- Strokes: up to 12 inches
- Round and square heads available
- Clear anodized aluminum cylinder outer diameter and hard anodized bore inner diameter
- Composite rod bearing for longer life
- Chrome-plated stainless steel piston rods
SC, FML and FHL Series
Swing Clamp Cylinders- Bore sizes: 25, 32, 40, 53, 63 millimeters (12, 16, 20 millimeters also available for SC Series)
- Hard anodized aluminum alloy housing
- Hard chrome-plated carbon steel piston rod
- Buna-N piston seal
- Magnetic piston for position sensing (SC Series)
FDF and FDXS Series
Twin-Rod Cylinder- Bore sizes: 10, 16, 20, 25 millimeters (32 millimeters also available for FDXS Series)
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Compact design
- Twin bores provide double the thrust
- Non-rotating design for precision positioning
- Anodized aluminum alloy
FGYB and FGYR Series
Magnetically Coupled Rodless Actuators- Bore sizes: 10, 15, 20, 25, 32, 40 millimeters
- Strokes: up to 1,500 millimeters
- Tapped hole pattern on two adjacent sides of the slider
- Mounting: Nose type (FGYB Series) and block type (FGYR Series)
- Magnetic piston standard (FGYR Series)
FGM and FGML Series
Guided Motion Actuators- Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63 millimeters
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Non-rotating design for precision positioning
- Compact design
- Extended power range
- Good load carrying capacity