Precise Power for Tight Spaces
FJS Series air cylinders function as drop-replacements for the discontinued Global Series.™ Units deliver short strokes in a compact design — similar to Original Pancake® cylinders — but are designed to meet international requirements. Interchangeable with other metric-based pneumatic designs in bore sizes ranging from 12 to 100 millimeters, and stroke lengths ranging from 5 to 100 millimeters.
Excellent Wear Resistance
Each FJS cylinder’s body provides excellent durability. For long product life, FJS features stainless steel or hard chrome plated carbon steel piston rods depending on bore size. The FJS Series also exhibits excellent load-bearing capabilities due to polytetrafluoroethylene (PTFE) and steel bearings. And, each cylinder comes pre-lubricated with Magnalube-G® — a Teflon™-impregnated grease that boosts resistance to moisture, water and oil separation.
Key Specifications
- Ten bore sizes from 12 to 100 millimeters
- Standard stroke lengths: 5 to 100 millimeters
- Metric or inch rod thread end mounting
- NPT, BSP parallel and BSP tapered port options
- Rod ends: female with wrench flats or male rod with wrench flats and jam nut
- Hard anodized bodies for superior corrosion resistance
- Pressure rated to 150 psi
- Magnetic piston option for cylinder position sensing
- Full complement of mounting options
- PTFE and steel bearings for excellent load bearing.
- Hard chrome-plated steel or stainless steel piston rods improve longevity.
- Magnalube-G grease extends cylinder life across a wide temperature range.
- Round sensor profiles accommodate switches without mounting brackets.
- Cylinders are interchangeable with many square, compact actuators from other manufacturers.
Applications
- Conveyors
- Semiconductor processing
- Motorcycle shocks
- Exhaust brakes
- Manifold mounts
- High-temperature applications
- Mold knock-out
Looking for a custom solution? Get a quote or view our other options.
Similar products in Actuators
View All Actuators
FAQ2R FAE
- Bore sizes: 32, 40, 50, 63, 80, 100, 125 millimeters
- Strokes: up to 1,000 millimeters
- FAQ2R Series: ISO 6431/VDMA24562
- FAE Series: ISO 6432/CETOP RP52P
- Magnetic piston standard in all sizes
- Single- and double-rod versions
- Machined male rod thread with jam nut standard
LONGSTROKE Series
Tie Rod Cylinders- Bore sizes: 2, 2 ½, 3 and 4 inches
- Strokes: up to 12 inches
- Round and square heads available
- Clear anodized aluminum cylinder outer diameter and hard anodized bore inner diameter
- Composite rod bearing for longer life
- Chrome-plated stainless steel piston rods
SC, FML and FHL Series
Swing Clamp Cylinders- Bore sizes: 25, 32, 40, 53, 63 millimeters (12, 16, 20 millimeters also available for SC Series)
- Hard anodized aluminum alloy housing
- Hard chrome-plated carbon steel piston rod
- Buna-N piston seal
- Magnetic piston for position sensing (SC Series)
FDF and FDXS Series
Twin-Rod Cylinder- Bore sizes: 10, 16, 20, 25 millimeters (32 millimeters also available for FDXS Series)
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Compact design
- Twin bores provide double the thrust
- Non-rotating design for precision positioning
- Anodized aluminum alloy
FGYB and FGYR Series
Magnetically Coupled Rodless Actuators- Bore sizes: 10, 15, 20, 25, 32, 40 millimeters
- Strokes: up to 1,500 millimeters
- Tapped hole pattern on two adjacent sides of the slider
- Mounting: Nose type (FGYB Series) and block type (FGYR Series)
- Magnetic piston standard (FGYR Series)
FGM and FGML Series
Guided Motion Actuators- Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63 millimeters
- Strokes: up to 100 millimeters
- Magnetic piston standard in all sizes
- Non-rotating design for precision positioning
- Compact design
- Extended power range
- Good load carrying capacity