Wide Grippers With a Compact Design
With its wide-gripper design, the FKHL Series is well-suited to handle larger parts in high volume jobs. Designed with oil-impregnated sleeve bearings encased in steel, these grippers move smoothly with no need for additional lubrication. The series also includes a built-in rod scraper for easier dust control and maintenance. Our dual-piston mechanism creates a high grip force to make sure the load stays in place.
Key Specifications
- Available in five bore sizes: 10, 16, 20, 25 and 32 millimeters
- Available in stroke sizes from 20 to 160 millimeters
- Operating pressure ranges: 15 to 87 psi
- Operating media: compressed air
- Repeatability: +/- 0.2 mm
- Effective Gripping Force at 72 psi:
- 10 mm bore: 3.1 lbf
- 16 mm bore: 10.1 lbf
- 20 mm bore: 16.6 lbf
- 25 mm bore: 29.4 lbf
- 32 mm bore: 51.2 lbf
- Magnetic piston standard
- Standard rod scrapers for dust and debris protection
- Oil impregnated sleeve bearings encased in steel on all units
- Integrated sensor slots in gripper body: easy sensor mounting for both “open” and “closed” position sensing
- Hard-coated aluminum gripper body: ensures abrasion, combats corrosion
- No additional lubrication required
Applications
- General parts handling, including heavy loads
- Injection molding part ejection
- Material transfer
Looking for a custom solution? Get a quote or view our other options.
Similar products in Grippers - Parallel
View All Grippers - Parallel
SPG Series
Two-Jaw Small Parallel Gripper- Sizes: 100 to 600
- Stroke: ¼ to 3 ¾ inches
- Grip Forces: Up to 402 lbs (C) or 88 lbs (O)
- Compact, lightweight design
- Assortment of jaw styles and materials
- Integral jaw/guide shaft/piston assembly
LPG Series
Two-Jaw Large Parallel Gripper- Sizes: 50 and 75
- Stroke: 2 to 24 inches
- Grip Forces: Up to 310 lbs (C) or 280 lbs (O)
- Adaptation of Fabco-Air EZ Series Linear Slide
- Double rack-and-pinion design
- Multiple jaw and mounting configurations
FKHS Series
Three-Jaw Small Parts Parallel Gripper- Sizes: 25 to 80 millimeters
- Stroke: 6 to 20 millimeters
- Grip Forces: up to 525N
- Compact, lightweight design
- Magnetic piston standard
FKHQ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Narrow jaw configuration
- Ideal for handling small parts in tight spaces
FKHZ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Wide jaw configuration
- Ideal for handling small parts in tight spaces