Parallel Jaw Motion for Large Parts and Long Strokes
The LPG Series is a version of the EZ Series of linear slides modified for gripping. Available in multiple configurations, these grippers support heavy loads and large parts. The toolbars extend toward and retract away from each other with absolute parallelism and precise synchronous motion. This series has centering that is accurate within 0.002 inch repeatability for virtually “play free” gripping.
Key Specifications
- Available in 1 ⅛ inch and 2 inch bore sizes
- Operating pressure standard at 100 psi
- Operating media: compressed air
- Centering accurate to within 0.002 inch repeatability
- Strokes up to 14 inches
- Adjustable stops for gripper jaws
- Max cylinder grip force of 310 lbsf.
- Jaw bars can be wide stance or cantilevered.
- Gripper can be mounted with the port side up or down because the end caps are machined on both the top and bottom surfaces.
- Toolbars (jaws) extend toward and retract away from each other with absolute parallelism and precise synchronous motion.
- Available with Viton seals for high-temperature operation.
Applications
- Heavy loads
- Injection molding part ejection
- General part handling
- Mattress spring assembly
- End of arm tooling
Looking for a custom solution? Get a quote or view our other options.
Similar products in Grippers - Parallel
View All Grippers - Parallel
SPG Series
Two-Jaw Small Parallel Gripper- Sizes: 100 to 600
- Stroke: ¼ to 3 ¾ inches
- Grip Forces: Up to 402 lbs (C) or 88 lbs (O)
- Compact, lightweight design
- Assortment of jaw styles and materials
- Integral jaw/guide shaft/piston assembly
FKHS Series
Three-Jaw Small Parts Parallel Gripper- Sizes: 25 to 80 millimeters
- Stroke: 6 to 20 millimeters
- Grip Forces: up to 525N
- Compact, lightweight design
- Magnetic piston standard
FKHQ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Narrow jaw configuration
- Ideal for handling small parts in tight spaces
FKHZ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Wide jaw configuration
- Ideal for handling small parts in tight spaces
FKHL Series
Two-Jaw Wide Parallel Gripper- Sizes: 10 to 32 millimeters
- Stroke: 20 to 160 millimeters
- Grip Forces: up to 51.2 lbf
- Magnetic piston and rod scrapers standard
- Repeatability: +/- 0.2mm
- Ideal for handling small parts in tight spaces