Lightweight Compact Grippers With Many Options
With its simple design, the SPG Series of parallel grippers is not only compact and lightweight, it also offers the widest range of customization options. This unique series features options for dowel pin precision mounting, adjustable stops, quiet high speed cycling, synchronization and much more.
Key Specifications
- Available in six stroke lengths: 0.25, 0.40, 0.54, 1.16, 1.38 and 3.75 inches
- Operating pressure standard at 100 psi
- Operating media: compressed air
- Repeatability: +/- 0.2 mm
- Only three moving parts
- Cylinder blocks symmetrical
- Porting block completes the housing
- Grip strength easily adjusted by varying pressure
- Lightweight and compact
Applications
- Heavy loads
- Part ejection
- Part handling
- Material transfer
Looking for a custom solution? Get a quote or view our other options.
Similar products in Grippers - Parallel
View All Grippers - Parallel
FKHS Series
Three-Jaw Small Parts Parallel Gripper- Sizes: 25 to 80 millimeters
- Stroke: 6 to 20 millimeters
- Grip Forces: up to 525N
- Compact, lightweight design
- Magnetic piston standard
FKHQ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Narrow jaw configuration
- Ideal for handling small parts in tight spaces
FKHZ Series
Two-Jaw Compact Parallel Gripper- Sizes: 10 to 25 millimeters
- Stroke: 4.6 to 13.9 millimeters
- Grip Forces: up to 23.3 lbf
- Magnetic piston standard
- Wide jaw configuration
- Ideal for handling small parts in tight spaces
FKHL Series
Two-Jaw Wide Parallel Gripper- Sizes: 10 to 32 millimeters
- Stroke: 20 to 160 millimeters
- Grip Forces: up to 51.2 lbf
- Magnetic piston and rod scrapers standard
- Repeatability: +/- 0.2mm
- Ideal for handling small parts in tight spaces
LPG Series
Two-Jaw Large Parallel Gripper- Sizes: 50 and 75
- Stroke: 2 to 24 inches
- Grip Forces: Up to 310 lbs (C) or 280 lbs (O)
- Adaptation of Fabco-Air EZ Series Linear Slide
- Double rack-and-pinion design
- Multiple jaw and mounting configurations